| Content | 
| 
| 
| 
|   
6 FT Single Leg Internal Shock Absorbing Lanyard with Snap & Rebar Hook
Features & Description
✅SAFE – The AFP 6 FT Single Leg Internal Shock Absorbing Lanyard is made with a lightweight, heavy-duty, high-strength outer polyester webbing and a polyester core specially sewn in to reduce impact forces, with two substantially secure heavy-duty double-locking gates.
✅DURABLE – The tough webbing is highly resistant to abrasion, aging, and won’t soften from frequent use. This webbing has low shrink properties and a high temperature threshold.
✅CONVENIENT – Our most popular 2-in-1 fall arrest single lanyard that minimizes trip hazards or fall with a shock absorber built into the lanyard, eliminating the need for an additional bulky shock pack. Elasticated leg expands from 4-1/2 to 6 feet and can resist 8,500 lbs. of tensile strength!
✅COMPLIANT – Meets all applicable strict requirements of the American National Standards Institute and in compliance with the Occupational Safety and Health Administration ANZSI Z359.13-13, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910, including the stringent ANSI Z359.1.
✅ SERVICE – AFP products are proudly designed, tested, and shipped from FL, USA. Our team will quickly answer all your questions and concerns about your order in English or Spanish, “Se Habla Español.” WOLF products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution.
The AFP Single-Leg Internal Shock Absorbing Lanyard is comprised of heavy-duty webbing, designed to diminish the risks of falling or slipping. The tough webbing is highly resistant to abrasion, aging, and will not soften from frequent use. This webbing has low shrink properties and a high-temperature threshold. Constructed to scale down the impact forces resulting from fall, this Shock Absorbing Lanyard assists workers in effectively moving and position themselves on the job site.
The shock absorber is built within the lanyard, making this a lightweight 2-in-1 feature that eliminates the need for a bulky shock pack. This shock-absorbing lanyard does not extend pass 6 FT unless impacted by the force of fall and must be used in conjunction with a full-body harness. Built tough, to limit fall forces up to 900 lbs. or less. Forged steel connectors are corrosion resistant and have a 3,600 lb. gate strength. The lanyard and its double-locking connectors are all ANZI compliant and are easy-to-use. Meets OSHA and ANSI standards, including the stringent ANSI Z359.1.
SPECIFICATIONS:
🛠️Weight: 3.4 lbs.
🛠️Standard Length: 4-1/2 ft.
🛠️Extended Length: 6 ft.
🛠️Max Freefall: 6 ft.
🛠️Connectors: (1) Rebar and (1) Snap Hook
🛠️Worker Capacity Range: 130-310 lbs.
🛠️Strength: Min. 8,500 lbs. tensile strength
🛠️Average Arrest Force: Less than 900 lbs.
🛠️Connectors Material: Forged Heat-Treated Alloy Steel; Min. 5,000 lbs. tensile strength
🛠️Connector Gates: Alloy Steel; Min. 3,600 lbs. front load and sideload
🛠️Applicable Standards: ANSI Z359.13-13, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910.
The AFP Single-Leg Internal Shock Absorbing Lanyard is comprised of heavy-duty webbing, designed to diminish the risks of falling or slipping. The tough webbing is highly resistant to abrasion, aging, and will not soften from frequent use. This webbing has low shrink properties and a high-temperature threshold. Constructed to scale down the impact forces resulting from fall, this Shock Absorbing Lanyard assists workers in effectively moving and position themselves on the job site.
The shock absorber is built within the lanyard, making this a lightweight 2-in-1 feature that eliminates the need for a bulky shock pack. This shock-absorbing lanyard does not extend pass 6 FT unless impacted by the force of fall and must be used in conjunction with a full-body harness. Built tough, to limit fall forces up to 900 lbs. or less. Forged steel connectors are corrosion resistant and have a 3,600 lb. gate strength. The lanyard and its double-locking connectors are all ANZI compliant and are easy-to-use. Meets OSHA and ANSI standards, including the stringent ANSI Z359.1. |   
AFP Cross Arm Strap Premium Heavy-Duty Pass-Through Double Steel Ring OSHA/ANSI
Features
✅ 🛠 SAFE – High quality and fully tested design is made of 100% heavy-duty high-viz orange polyester with superior YOKE foraged steel rings. Connectors are corrosion resistant have a double-reinforced heavy-duty 3-inch wide premium stitched webbing, for a high-breaking strength. Provides twice the abrasion, durability, and snag protection. Upgraded braided webbing with a high-tension stitching pattern for maximum security and breaking tensile strength of 5,000 lbs.
✅ 🛠 RELIABLE – Galvanized steel rings ensure all weather performance and used for easily passing-through I-beams, pipes, columns, and other structures. Ideal where a free fall is restricted to no more than 6/10 feet and it is not exposed to any sharp or abrasive edge. Once connected to a secure over-head anchor point, pass the cross-arm strap through the D-ring, and form a secure attachment point for lanyards and other connecting devices such as harnesses, lanyards, SRLs or vertical lifelines.
✅ 🛠 CONVENIENT –The webbing is made from a dependable webbing that ensures that it is suitable for the most severe environments all while maintaining maximum tenacity. Rugged construction endures rough use, standing up to long periods of outdoor elements including sun exposure with a high sun rating, without tearing or fraying for added longevity. Protective high-viz orange finish on the webbing repels water, grease, and dirt, extends the service life of the strap, and provides higher visibility.
✅ 🛠 COMPLIANT – This compliant strap is designed and intended to be used with other components of a Personal Fall Arrest System. Meets all applicable ANSI, OSHA and CSA requirements, OSHA 29 CFR 1910.66, 1926.502, ANSI/ASSE Z359.7, 18-17, ANSI Z359.12, Z359.1-2007, and works with your ANSI OSHA fall protection items. All hardware meets ASTM (50) fifty-hour salt spray test requirements. Used for various applications such as construction, climbing, roofing, surveying, window cleaning, etc.
✅ 🛠 SERVICE – AFP products are proudly designed, tested, and shipped from FL, USA. Our team will quickly answer all your questions and concerns about your order in English or Spanish, “Se Habla Español.” WOLF products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution.
SPECIFICATIONS
Item: Cross Arm Strap
Series Model: AFCAS1906
Color: Black / Hi-Viz Orange
Length: 6/10 Feet
Material: Heavy-Duty High-Strength Polyester Webbing / Galvanized Steel
Performance: 5,000lbs (22.2 KN) Tensile Strength
DESCRIPTION
The AFP 6/10-foot cross arm strap is comprised of heavy-duty webbing, designed to diminish the risks of fall. The tough webbing is highly resistant to abrasion, aging, and will not soften from frequent use. This webbing has low shrink properties and a high-temperature threshold. Our straps have a build quality that is second-to-none, backed by decades of design, research, manufacturing know-how, and on-the-job performance.
Ideal for uses in residential, commercial, or industrial markets such as construction, roofing/roofer, aerial lifts, scaffolding platforms, fall protection kits, guardrails, lanyard extension or anchor to a beam, swing hanging, tree trimming, arborist, zip line and many more! Forged steel connectors are corrosion resistant and have a 5,000 lb. tensile strength. Meets or exceeds all applicable OSHA and ANSI standards, including the stringent ANSI Z359.12, Z359.1-2007.
FROM THE MANUFACTURER
This equipment must be used by a Competent Person, or the single user must read and fully understand the limitations and proper use of the Fall protection equipment and be professionally trained by the Competent Person prior to use. For use by one person only, with a maximum weight of 310 lbs.
Combined user weight, including clothing and tools, must not exceed the weight capacity of 420 lbs, 5,000 lbs (22.2 KN) tensile strength. Straps should be removed from any surface that may damage the material such as concrete, stucco roofing material, etc., that could accelerate cutting or abrading of attached components.
|
Reviews
There are no reviews yet.