| Description | Specifications
- Item: Cross Arm Strap
- Length: 6 Foot
- Model Number AFCAS1906
- Color Black / Hi-Viz Orange
- Material: Heavy-Duty High-Strength Polyester Webbing / Galvanized Steel
- Performance: 5,000lbs (22.2 KN) Tensile Strength
- Rating: Meets and/or exceeds OSHA 29 CFR 1910.66, 1926.502, ANSI/ASSE Z359.7, ANSI Z359.12, Z359.1-2007, Z359.18-17
| Specifications:
- Weight: 2.5 lbs.
- Standard Length: 4-1/2 ft.
- Extended Length: 6 ft.
- Max Freefall: 6 ft.
- Connectors: (2) Snap Hooks
- Worker Capacity Range: 130-310 lbs.
- Strength: Min. 8,500 lbs. tensile strength
- Average Arrest Force: Less than 900 lbs.
- Webbing Materials: Heavy-Duty High-Strength Polyester and Nylon
- Connector Material: Forged Heat-Treated Alloy Steel; Min. 5,000 lbs. tensile strength
- Connector Gates: Alloy Steel; Min. 3,600 lbs. front load and side load
- Applicable Standards: ANSI Z359.13-13, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910.
| Specifications:
Harness
- (1) Dorsal D-Ring for fall arrest
- Tensile strength of 5,000lbs.
- Upgraded braided webbing
- Universal size, fist most
- 5-point adjustability
- Mating chest buckle
Vertical Lifeline with Rope Grab:
- Premium braided rope
- 5/8’’ diameter (EN353-2)
- Maximum deployment distance: 48’’
- Average arresting force: 900lbs.
- Max Free Fall: 6 FT
- (2) snap hooks and (1) rope grab
- Gate strength: 3,600lbs.
Adjustable Hinged Anchor:
- Accommodates most roof pitches
- Galvanized steel with forged D-Ring
- Tensile strength of 5,000lbs
Tool Lanyard:
- Weight per lanyard: 48 oz
- Relaxed Length: 33.5 in.
- Expanded Length: 53 in.
- Capacity: 15 lbs.
- Carabiner: Anodized aluminum
- Strand: Upgraded Braided Multi-Fiber
- Webbing Materials: Heavy-Duty High-Strength Nylon Webbing
Tool Bag:
- Heavy-duty bag
- 680D Ballistic Nylon material
- (2) thick straps
| Specifications
- Weight per lanyard: 4 Lbs.
- Length: 18 inches
- Capacity: 420 Lbs.
- Carabiner: Galvanized Steel
- Strand: Upgraded Braided Multi-Fiber
- Webbing Materials: Heavy-Duty High-Strength Polyester Webbing
- Applicable Standards: Meets ANSI/ISEA 121-2018
- High Quality, Fully Tested Design Meets ALL Applicable ANSI and OSHA Standards
- D-Ring Extenders webbing must be inspected for tears, cuts, fraying, abrasion, discoloration, or other signs of wear and damage. Sewn terminations must be secure, complete, and not visibly damaged.
| Specifications
- Item Aluminum Rebar Chain Assembly
- Hardware Material Aluminum & Steel
- Anchorage Rebar Hook Gate Opening 2-1/2"
- Steel Snap Hook Gate Opening 1’’
- Body Connection 1 Rebar Aluminum Hook
- Base Connection 2 Snap Hooks
- Applicable Standards ANSI Z359.3-17, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910
- Worker Capacity Weight 130 – 310 Lbs.
| Specifications
- Weight: (S/M), (L/XL), 2XL, 3XL
- Capacity: 310 Lbs.
- Hardware: Alloy Steel
- Braiding: Upgraded Hi-Viz Lime Braided Multi-Fiber
- Webbing Materials: 100% Heavy-Duty High-Strength Polyester Webbing
- Applicable Standards: Meets ANSI Z359.11.Compliant with OSHA 1926 Subpart M, OSHA 1910
- High Quality, Fully Tested Design Meets ALL Applicable ANSI and OSHA Standards
- Webbing must be inspected for tears, cuts, fraying, abrasion, discoloration, or other signs of wear and damage. Sewn terminations must be secure, complete, and not visibly damaged.
|
| Content |   
AFP Cross Arm Strap Premium Heavy-Duty Pass-Through Double Steel Ring OSHA/ANSI
Features
✅ 🛠 SAFE – High quality and fully tested design is made of 100% heavy-duty high-viz orange polyester with superior YOKE foraged steel rings. Connectors are corrosion resistant have a double-reinforced heavy-duty 3-inch wide premium stitched webbing, for a high-breaking strength. Provides twice the abrasion, durability, and snag protection. Upgraded braided webbing with a high-tension stitching pattern for maximum security and breaking tensile strength of 5,000 lbs.
✅ 🛠 RELIABLE – Galvanized steel rings ensure all weather performance and used for easily passing-through I-beams, pipes, columns, and other structures. Ideal where a free fall is restricted to no more than 6/10 feet and it is not exposed to any sharp or abrasive edge. Once connected to a secure over-head anchor point, pass the cross-arm strap through the D-ring, and form a secure attachment point for lanyards and other connecting devices such as harnesses, lanyards, SRLs or vertical lifelines.
✅ 🛠 CONVENIENT –The webbing is made from a dependable webbing that ensures that it is suitable for the most severe environments all while maintaining maximum tenacity. Rugged construction endures rough use, standing up to long periods of outdoor elements including sun exposure with a high sun rating, without tearing or fraying for added longevity. Protective high-viz orange finish on the webbing repels water, grease, and dirt, extends the service life of the strap, and provides higher visibility.
✅ 🛠 COMPLIANT – This compliant strap is designed and intended to be used with other components of a Personal Fall Arrest System. Meets all applicable ANSI, OSHA and CSA requirements, OSHA 29 CFR 1910.66, 1926.502, ANSI/ASSE Z359.7, 18-17, ANSI Z359.12, Z359.1-2007, and works with your ANSI OSHA fall protection items. All hardware meets ASTM (50) fifty-hour salt spray test requirements. Used for various applications such as construction, climbing, roofing, surveying, window cleaning, etc.
✅ 🛠 SERVICE – AFP products are proudly designed, tested, and shipped from FL, USA. Our team will quickly answer all your questions and concerns about your order in English or Spanish, “Se Habla Español.” WOLF products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution.
SPECIFICATIONS
Item: Cross Arm Strap
Series Model: AFCAS1906
Color: Black / Hi-Viz Orange
Length: 6/10 Feet
Material: Heavy-Duty High-Strength Polyester Webbing / Galvanized Steel
Performance: 5,000lbs (22.2 KN) Tensile Strength
DESCRIPTION
The AFP 6/10-foot cross arm strap is comprised of heavy-duty webbing, designed to diminish the risks of fall. The tough webbing is highly resistant to abrasion, aging, and will not soften from frequent use. This webbing has low shrink properties and a high-temperature threshold. Our straps have a build quality that is second-to-none, backed by decades of design, research, manufacturing know-how, and on-the-job performance.
Ideal for uses in residential, commercial, or industrial markets such as construction, roofing/roofer, aerial lifts, scaffolding platforms, fall protection kits, guardrails, lanyard extension or anchor to a beam, swing hanging, tree trimming, arborist, zip line and many more! Forged steel connectors are corrosion resistant and have a 5,000 lb. tensile strength. Meets or exceeds all applicable OSHA and ANSI standards, including the stringent ANSI Z359.12, Z359.1-2007.
FROM THE MANUFACTURER
This equipment must be used by a Competent Person, or the single user must read and fully understand the limitations and proper use of the Fall protection equipment and be professionally trained by the Competent Person prior to use. For use by one person only, with a maximum weight of 310 lbs.
Combined user weight, including clothing and tools, must not exceed the weight capacity of 420 lbs, 5,000 lbs (22.2 KN) tensile strength. Straps should be removed from any surface that may damage the material such as concrete, stucco roofing material, etc., that could accelerate cutting or abrading of attached components.
|   
6 FT Single Leg Internal Shock Absorbing Lanyard with Dual Snap Hooks
Features & Description
✅SAFE – The AFP 6 FT Single Leg Internal Shock Absorbing Lanyard is made with a lightweight, heavy-duty, high-strength outer polyester webbing and a polyester core specially sewn in to reduce impact forces, with two substantially secure heavy-duty double-locking gates.
✅DURABLE – The tough webbing is highly resistant to abrasion, aging, and won’t soften from frequent use. This webbing has low shrink properties and a high temperature threshold.
✅CONVENIENT – Our most popular 2-in-1 fall arrest single lanyard that minimizes trip hazards or fall with a shock absorber built into the lanyard, eliminating the need for an additional bulky shock pack. Elasticated leg expands from 4-1/2 to 6 feet and can resist 8,500 lbs. of tensile strength!
✅COMPLIANT – Meets all applicable strict requirements of the American National Standards Institute and in compliance with the Occupational Safety and Health Administration ANZSI Z359.13-13, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910, including the stringent ANSI Z359.1.
✅ SERVICE – AFP products are proudly designed, tested, and shipped from FL, USA. Our team will quickly answer all your questions and concerns about your order in English or Spanish, “Se Habla Español.” WOLF products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution.
The AFP Single-Leg Internal Shock Absorbing Lanyard is comprised of heavy-duty webbing, designed to diminish the risks of falling or slipping. The tough webbing is highly resistant to abrasion, aging, and won’t soften from frequent use. This webbing has low shrink properties and a high-temperature threshold. Constructed to scale down the impact forces resulting from fall, this Shock Absorbing Lanyard assists workers in effectively moving and position themselves on the job site.
The shock absorber is built within the lanyard, making this a lightweight 2-in-1 feature that eliminates the need for a bulky shock pack. This shock-absorbing lanyard does not extend pass 6 FT unless impacted by the force of fall and must be used in conjunction with a full-body harness. Built tough, to limit fall forces up to 900 lbs. or less. Forged steel connectors are corrosion resistant and have a 3,600 lb. gate strength. The lanyard and its double-locking connectors are all ANZI compliant and are easy-to-use. Meets OSHA and ANSI standards, including the stringent ANSI Z359.1.
SPECIFICATIONS:
🛠️Weight: 2.5 lbs.
🛠️Standard Length: 4-1/2 ft.
🛠️Extended Length: 6 ft.
🛠️Max Freefall: 6 ft.
🛠️Connectors: (2) Snap Hooks
🛠️Worker Capacity Range: 130-310 lbs.
🛠️Strength: Min. 8,500 lbs. tensile strength
🛠️Average Arrest Force: Less than 900 lbs.
🛠️Connectors Material: Forged Heat-Treated Alloy Steel; Min. 5,000 lbs. tensile strength
🛠️Connector Gates: Alloy Steel; Min. 3,600 lbs. front load and sideload
🛠️Applicable Standards: ANSI Z359.13-13, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910.
The AFP Single-Leg Internal Shock Absorbing Lanyard is comprised of heavy-duty webbing, designed to diminish the risks of falling or slipping. The tough webbing is highly resistant to abrasion, aging, and will not soften from frequent use. This webbing has low shrink properties and a high-temperature threshold. Constructed to scale down the impact forces resulting from fall, this Shock Absorbing Lanyard assists workers in effectively moving and position themselves on the job site. The shock absorber is built within the lanyard, making this a lightweight 2-in-1 feature that eliminates the need for a bulky shock pack.
This shock-absorbing lanyard does not extend pass 6 FT unless impacted by the force of fall and must be used in conjunction with a full-body harness. Built tough, to limit fall forces up to 900 lbs. or less. Forged steel connectors are corrosion resistant and have a 3,600 lb. gate strength. The lanyard and its double-locking connectors are all ANZI compliant and are easy-to-use. Meets OSHA and ANSI standards, including the stringent ANSI Z359.1. |    
AFP 50FT Fall Protection Roofer Kit Braided Vertical Lifeline w/Rope Grab, 1 D-Ring Safety Harness, Hinged Anchor, Ballistic Nylon Tool Bag, Tool Lanyard | OSHA & ANSI Rated
Features
✅PREMIUM BRAIDED ROPE – AFP’s 50FT vertical lifeline is a premium braided rope with a 5/8’’ diameter. Roofer KitMaximum deployment distance of 48’’ and with an average arresting force of 900lbs! The rope is attached with a rope grab and two galvanized steel snap hooks with a gate strength of 3,600lbs. The rope grabs trailing feature allows rope grab to follow the user, providing freedom of movement. Alloy steel hardware ensures all weather performance avert wear and tear against all weather conditions.
✅REUSABLE ANCHOR – Galvanized steel hinged anchor meets all ANSI, CSA, and OSHA safety requirements for residential and commercial roofing applications. Re-use this anchor bracket as part of your personal fall arrest system. Hinged design adjusts to most roof pitch and connects to roof surface as an anchor point. Made with quality materials to ensure corrosion resistance and durability with a tensile strength of 5,000lbs, this anchor is sure to stand against the toughest work environments.
✅1 D-Ring Harness – Upgraded braided webbing designed with a high-tension stitching pattern for maximum security and tensile strength of over 5,000 lbs! The tough webbing is highly resistant to abrasion, aging, and won’t soften from frequent use. Alloy steel D-ring ensures all weather performance inhibiting breakage against all weather conditions. Rugged construction endures rough use, standing up to long periods of outdoor factors without tearing or fraying for added longevity.
✅FREE TOOL LANYARD – Carry your tools in our heavy-duty 1680D Ballistic Nylon tool bag. Tool lanyard can be effectively released with one hand in any event. Dependable webbing material secures and resists 15lbs. Quick-release lightweight aluminum is self-locking and connects to belt or harness, allowing free movement. Double-hole cord stopper seals and locks tool securely. Compliant design for restricting force on the body and equipment caused by dropped tools, avoiding injury and damage.
✅PERFORMANCE – All components of AFP’s Roofer Kit are OSHA and ANSI compliant for your Personal Fall Arrest system. This equipment must be used by a Competent Person, or the single user must read and fully understand the limitations and proper use of the Fall protection equipment and be professionally trained by the Competent Person prior to use. For use by one person only. Combined user weight, including clothing and tools must not exceed weight capacity of 310 lbs. |   
18-inch D-Ring Extender Fall Protection with Snap Hook and O-Ring OSHA/ANSI Compliant
Features
✅SAFE – D-Ring Extender Galvanized quick-release self-locking steel hook ensures all weather performance and used for easily adding length to the back D-Ring of harnesses. Snap hook must be connected to the dorsal D-ring of the full body harness. The O-rings are to be connected to the anchorage connector.
✅RELIABLE – Made of 100% heavy-duty polyester with superior foraged steel O-ring and hook. Forged steel connectors are corrosion resistant and self-locking snap hook has a 3,600 lb. gate strength. Upgraded braided lanyard with a high-tension stitching pattern for maximum security and breaking strength of 5500 lbs.
✅CONVENIENT – This compliant extension is designed and intended to be used with other components of a Personal Fall Arrest system or Personal restraint system. The lanyard is made from a dependable webbing that ensures that it is suitable for the most severe environments all while maintaining maximum tenacity. Rugged construction endures rough use, standing up to long periods of outdoor elements including sun exposure without tearing or fraying for added longevity.
✅PERFORMANCE – Meets ANSI Z359.12, Z359.1-2007 and works with your ANSI OSHA fall protection items. Used for various applications such as construction, climbing, roofing, surveying, window cleaning, camping, etc. This equipment must be used by a Competent Person, or the single user must read and fully understand the limitations and proper use of the Fall protection equipment and be professionally trained by the Competent Person prior to use. For use by one person only, with maximum weight of 310 lbs. Combined user weight, including clothing and tools must not exceed weight capacity of 420 lbs.
✅ SERVICE – AFP products are proudly designed, tested, and shipped from FL, USA. Our team will quickly answer all your questions and concerns about your order in English or Spanish, “Se Habla Español.” WOLF products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution.
The AFP 18-inch d-ring extension is comprised of heavy-duty webbing, designed to diminish the risks of fall. The tough webbing is highly resistant to abrasion, aging, and will not soften from frequent use. This webbing has low shrink properties and a high-temperature threshold.
Our positioning lanyards have a build quality that is second-to-none, backed by decades of design, research, manufacturing know-how and on-the-job performance. Snap hook must be connected to the dorsal D-ring of the full body harness. The O-rings are to be connected to the anchorage connector. Forged steel connectors are corrosion resistant and have a 3,600 lb. gate strength. The lanyard and its double-locking connectors are all ANZI compliant and are easy-to-use. Meets OSHA and ANSI standards, including the stringent ANSI Z359.12, Z359.1-2007.
SPECIFICATIONS
🛠️Weight: 1.4 Lbs.
🛠️Length: 18 inches
🛠️Capacity: 420 Lbs.
🛠️Carabiner: Galvanized Steel
🛠️Strand: Upgraded Braided Multi-Fiber
🛠️Webbing Materials: Heavy-Duty High-Strength Polyester Webbing
🛠️Applicable Standards: Meets ANSI/ISEA 121-2018
🛠️High Quality, Fully Tested design which meets ALL Applicable ANSI and OSHA Standards
🛠️D-Ring Extenders webbing must be inspected for tears, cuts, fraying, abrasion, discoloration, or other signs of wear and damage. Sewn terminations must be secure, complete, and not visibly damaged.
FEATURES
The AFP 18 inch D-ring extension is comprised of heavy-duty webbing, designed to diminish the risks of fall. The tough webbing is highly resistant to abrasion, aging, and won’t soften from frequent use. This webbing has low shrink properties and a high-temperature threshold. Our positioning lanyards have a build quality that is second-to-none, backed by decades of design, research, manufacturing know-how, and on-the-job performance.
Snap hook must be connected to the dorsal D-ring of the full-body harness. The O-rings are to be connected to the anchorage connector. Forged steel connectors are corrosion resistant and have a 3,600 lb. gate strength. The lanyard and its double-locking connectors are all ANZI compliant and are easy-to-use. Meets OSHA and ANSI standards, including the stringent ANSI Z359.12, Z359.1-2007. |    
AFP Heavy-Duty 26’’ Aluminum Rebar Positioning Chain Assembly with Swivel & Steel Snap Hooks, Safety Fall Protection Positioning Restraint (OSHA/ANSI) PPE
Features & Description
✅STRENGTH – 100% proof loaded to 3600 lbs. This chain assembly features 3,600 lb. gate-rated double-locking aluminum rebar hook and dual snap hooks.
✅ENGINEERED – This heavy-duty 19-link steel chain features a single 360° steel rotating rebar hook for easier lateral movements while on the job.
✅DURABLE – Extremely reliable design, heat-treated, forged steel hooks and twist link chain construction.
✅LIGHTWEIGHT – Lightweight aluminum and reliable design makes this assembly ideal for hands-free work positioning.
✅SAFE – When you're working at height, you need to be able to trust your personal protective equipment, not only for your sake, but for the sake of your co-workers below. AFP Fall Protection elevates worker safety to new heights with quality products, people and service.
With fall protection designed to comply with industry standards and adapt to the needs of today's workforce, we're committed to making products that help employers bring workers home safely.
The AFP Rebar Positioning Chain Assembly with Swivel Hook is perfect for work positioning applications and tie-off on rebar assemblies. Workers can work hands-free to perform their work while simultaneously leaning away from work assemblies, with the chain's double-legged and swivel design.
This heavy-duty 19-link steel chain features a single 360° steel rotating rebar hook. The chain features 3,600 lb. gate-rated double-locking aluminum rebar hook and dual steel snap hooks. The Aluminum Rebar Positioning Chain Assembly must be used with a full-body harness that includes side D-rings. The chain must not be used for fall arrest free falls over 2 feet.
SPECIFICATIONS
Item: Aluminum Rebar Chain Assembly
Hardware Material: Lightweight Aluminum & Forged Heat Treated Steel
Anchorage Aluminum Rebar Hook Gate Opening: 2-1/2"
Steel Snap Hook Gate Opening: 1’’
Body Connection: 1 Aluminum Rebar Hook
Base Connection: 2 Steel Snap Hooks
Chain Length: 26 inches
Applicable Standards: ANSI Z359.3-17, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910
Worker Capacity Weight 130 – 310 Lbs.
FEATURES
The AFP 26’' Aluminum Rebar Positioning Chain Assembly with Swivel Hook is perfect for work positioning applications and tie-off on rebar assemblies. Workers can work hands-free to perform their work while simultaneously leaning away from work assemblies, with the chain's double-legged and swivel design. This heavy-duty 19-link steel chain features a single 360° steel rotating rebar hook. The chain features 3,600 lb. gate-rated double-locking rebar hook and dual snap hooks. The Aluminum Rebar Positioning Chain Assembly must be used with a full-body harness that includes side D-rings. The chain must not be used for fall arrest free falls over 2 feet. |   
AFP Fall Protection Premium Black Safety Harness w/ Hi-Viz Lime Stitches, Bad Boy Vented & Padded Shoulder, Legs and Back, 8” Thick Back Support Belt, 3 D-Rings, Tongue Buckle, Quick Release (OSHA/ANSI PPE)
Features
✅COMFORT – Upgraded thick premium vented breathable mesh plush pads for added comfort delivering relief to shoulders, legs, and back. Reinforced soft edges foam shoulder pads prevent skin from chafing. Water-wicking material averts the harness from sweat build-up and water breakage. Constructed with extra-wide 8’’ back support belt with premium plush padding for major support, soothing comfort and lateral movements. 5 adjustment points on the padded shoulders, padded legs, and chest, Bad Boy.
✅LIGHTWEIGHT & CONVENIENT – Stand out with hi-viz lime stitching webbing throughout the harness. Endures rough use, standing up to long periods of the outdoors including sun without corrosion, tearing or fraying for added longevity. Quick-Release buckles on the chest and spring activated shoulder adjuster. Convenient buckle strap on shoulder pad to hold cell phone, lanyards, walkie-talkies, etc. Side D-rings allows use of both hands. Fixed D-ring reduces constant readjustments and stays in position.
✅RELIABLE – Upgraded hi-viz lime braided webbing designed with a high-tension stitching pattern for maximum visibility, security and a tensile strength of over 5,000 lbs! Tough webbing is highly resistant to abrasion, aging, and will not soften from frequent use. Thick sturdy belt for tool bag carrying convenience. Durable lanyard keepers on both straps for easy parking of hooks and carabiners. Equipped with a new molded “easy-link” SRL adapter technology, which allows for easy SRL attachments.
✅PERFORMANCE – Bad Boy Harness is designed for a maximum capacity of 310lbs, including the worker's body weight, clothing, tools and other accessories. Meets ANSI Z359.11; and OSHA 1910.140 and 1926.502. D-rings conform to EN361-2002. We rigorously test all our Fall Protection safety products to ensure they meet global industry standards established by OSHA, MSHA, ANSI, CSA and CE. Our ISO 9001-2008 certification and on-site ISO 17025-accredited lab demonstrates our commitment to quality and safety.
✅SAFE – When you're working at height, you need to be able to trust your personal protective equipment, not only for your sake, but for the sake of your co-workers below. AFP Fall Protection elevates worker safety to new heights with quality products, people and service. With harnesses designed to comply with industry standards and adapt to the needs of today's workforce, we're committed to making products that help employers bring workers home safely.
SPECIFICATIONS
🛠️Capacity: 310 Lbs.
🛠️Hardware: Alloy Steel
🛠️Braiding: Upgraded Hi-Viz Lime Braided Multi-Fiber
🛠️Webbing Materials: 100% Heavy-Duty High-Strength Polyester Webbing
🛠️Applicable Standards:Meets ANSI Z359.11; and OSHA 1910.140 and 1926.502. D-rings conform to EN361-2002.
🛠️High Quality, Fully Tested Design Meets ALL Applicable ANSI and OSHA Standards
🛠️Webbing must be inspected for tears, cuts, fraying, abrasion, discoloration, or other signs of wear and damage. Sewn terminations must be secure, complete, and not visibly damaged. |
Reviews
There are no reviews yet.