Description | Specifications:
- Standard Length: 4-1/2 ft.
- Extended Length (per leg): 6 ft.
- Max Freefall: 6 ft.
- Connectors: (2) Aluminum Rebar and (1) Snap Hook
- Worker Capacity Range: 130-310 lbs.
- Strength: Min. 8,500 lbs. tensile strength
- Average Arrest Force: Less than 900 lbs.
- Webbing Materials: Heavy-Duty High-Strength Polyester and Nylon
- Connector Material: Forged Heat-Treated Alloy Steel; Min. 5,000 lbs. tensile strength
- Connector Gates: Alloy Steel; Min. 3,600 lbs. front load and side load
- Applicable Standards: ANSI Z359.13-13, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910.
| AFP 4/6 ’ Concrete Anchor Strap Heavy-Duty w/ Loop Ends OSHA/ANSI Compliant 5,000lb
Specifications
● Item: Concrete Anchor Strap
● Length: 4/6 Foot
● Model Number: AFAS1104
● Color: Black / Hi-Viz Yellow
● Material: Heavy-Duty High-Strength Polyester Webbing
● Performance: 5,000lbs (22.2 KN) Tensile Strength
● Rating: Meets and/or exceeds OSHA 29 CFR 1910.66, 1926.502, ANSI/ASSE Z359.7, ANSI Z359.12, Z359.1-2007, Z359.18-17 | Features:
- Width: 1.75 inches
- Hardware: 100% Heavy-Duty High-Strength Alloy Steel
- Braiding: Upgraded Braided Multi-Fiber
- Webbing Materials: 100% Heavy-Duty High-Strength Polyester Webbing
- Applicable Standards: Meets OSHA 1926 Subpart M, OSHA 1910 and ANSI Z359.3‐2007 when integrated into a full-body harness. High Quality, Fully Tested Design Meets ALL Applicable ANSI and OSHA Standards
Please Note: Webbing must be inspected for tears, cuts, fraying, abrasion, discoloration, or other signs of wear and damage. Sewn terminations must be secure, complete, and not visibly damaged. Before each use, this product must be inspected by a competent person to ensure safety of the users. | Specifications
- Item Rebar Chain Assembly
- Hardware Material Zinc Plated
- Anchorage Rebar Hook Gate Opening 2-1/2"
- Steel Snap Hook Gate Opening 1’’
- Body Connection 1 Rebar Aluminum Hook
- Base Connection 2 Snap Hooks
- Worker Capacity Weight 130 – 310 Lbs.
| Specifications:
- Weight: 2.5 lbs.
- Standard Length: 4-1/2 ft.
- Extended Length: 6 ft.
- Max Freefall: 6 ft.
- Connectors: (2) Snap Hooks
- Worker Capacity Range: 130-310 lbs.
- Strength: Min. 8,500 lbs. tensile strength
- Average Arrest Force: Less than 900 lbs.
- Webbing Materials: Heavy-Duty High-Strength Polyester and Nylon
- Connector Material: Forged Heat-Treated Alloy Steel; Min. 5,000 lbs. tensile strength
- Connector Gates: Alloy Steel; Min. 3,600 lbs. front load and side load
- Applicable Standards: ANSI Z359.13-13, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910.
| Specifications:
- Weight: 3.4 lbs.
- Standard Length: 4-1/2 ft.
- Extended Length: 6 ft.
- Max Freefall: 6 ft.
- Connectors: (1) Rebar and (1) Snap Hook
- Worker Capacity Range: 130-310 lbs.
- Strength: Min. 8,500 lbs. tensile strength
- Average Arrest Force: Less than 900 lbs.
- Webbing Materials: Heavy-Duty High-Strength Polyester and Nylon
- Connector Material: Forged Heat-Treated Alloy Steel; Min. 5,000 lbs. tensile strength
- Connector Gates: Alloy Steel; Min. 3,600 lbs. front load and side load
- Applicable Standards: ANSI Z359.13-13, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910.
|
Content |   
6 FT Double Leg Internal Shock Absorbing Lanyard with Dual Aluminum Rebar Hooks and Snap Hook
Features
✅SAFE – The AFP 6 FT double Leg Internal Shock Absorbing Lanyard is made with a lightweight, heavy-duty, high-strength outer polyester webbing and a polyester core specially sewn in to reduce impact forces, with two substantially secure heavy-duty double-locking gates.
✅DURABLE – The tough webbing is highly resistant to abrasion, aging, and won’t soften from frequent use. This webbing has low shrink properties and a high temperature threshold.
✅CONVENIENT – Our most popular 2-in-1 fall arrest double lanyard that minimizes trip hazards or fall with a shock absorber built into the lanyard, eliminating the need for an additional bulky shock pack. Elasticated leg expands from 4-1/2 to 6 feet and can resist 8,500 lbs. of tensile strength!
✅COMPLIANT – Meets all applicable strict requirements of the American National Standards Institute and in compliance with the Occupational Safety and Health Administration ANZSI Z359.13-13, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910, including the stringent ANSI Z359.1.
✅ SERVICE – AFP products are proudly designed, tested, and shipped from FL, USA. Our team will quickly answer all your questions and concerns about your order in English or Spanish, “Se Habla Español.” WOLF products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution.
The AFP Single-Leg Internal Shock Absorbing Lanyard is comprised of heavy-duty webbing, designed to diminish the risks of falling or slipping. The tough webbing is highly resistant to abrasion, aging, and won’t soften from frequent use. This webbing has low shrink properties and a high-temperature threshold. Constructed to scale down the impact forces resulting from fall, this Shock Absorbing Lanyard assists workers in effectively moving and position themselves on the job site.
The shock absorber is built within the lanyard, making this a lightweight 2-in-1 feature that eliminates the need for a bulky shock pack. This shock-absorbing lanyard does not extend pass 6 FT unless impacted by the force of fall and must be used in conjunction with a full-body harness. Built tough, to limit fall forces up to 900 lbs. or less. Forged steel connectors are corrosion resistant and have a 3,600 lb. gate strength. The lanyard and its double-locking connectors are all ANZI compliant and are easy-to-use. Meets OSHA and ANSI standards, including the stringent ANSI Z359.1.
SPECIFICATIONS:
🛠️Weight: 6.1 lbs.
🛠️Standard length per leg: 4-1/2 ft.
🛠️Extended length per leg: 6 ft.
🛠️Max Freefall: 6 ft.
🛠️Connectors: (2) Rebar and (1) Snap Hook
🛠️Worker Capacity Range: 130-310 lbs.
🛠️Strength: Min. 8,500 lbs. tensile strength
🛠️Average Arrest Force: Less than 900 lbs.
🛠️Connectors Material: Forged Heat-Treated Alloy Steel; Min. 5,000 lbs. tensile strength
🛠️Connector Gates: Alloy Steel; Min. 3,600 lbs. front load and sideload
🛠️Applicable Standards: ANSI Z359.13-13, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910.
The AFP Double-Leg Internal Shock Absorbing Lanyard is comprised of heavy-duty webbing, designed to diminish the risks of falling or slipping. The tough webbing is highly resistant to abrasion, aging, and won’t soften from frequent use. This webbing has low shrink properties and a high-temperature threshold. Constructed to scale down the impact forces resulting from fall, this Shock Absorbing Lanyard assists workers in effectively moving and position themselves on the job site.
The shock absorber is built within the lanyard, making this a lightweight 2-in-1 feature that eliminates the need for a bulky shock pack. This shock-absorbing lanyard does not extend pass 6 FT unless impacted by the force of fall and must be used in conjunction with a full-body harness. Built tough, to limit fall forces up to 900 lbs. or less. Forged steel connectors are corrosion resistant and have a 3,600 lb. gate strength. The lanyard and its double-locking connectors are all ANZI compliant and are easy-to-use. Meets OSHA and ANSI standards, including the stringent ANSI Z359.1. |   
AFP 4/6’ Concrete Anchor Strap Heavy-Duty w/ Loop Ends OSHA/ANSI Compliant 5,000lb
Features
✅ 🛠 SAFE – Tie down with our high quality and fully tested concrete pour-in-place concrete strap made of 100% heavy-duty high-viz yellow polyester webbing with superior loop ends. You can feel safe with our double-reinforced heavy-duty 2.5-inch wide premium stitched webbing, for a high-breaking strength. Provides twice the abrasion, durability, and snag protection. Upgraded braided webbing with a high-tension stitching pattern for maximum security and breaking tensile strength of 5,000 lbs.
✅ 🛠 RELIABLE – Ensures all weather performance and used for easy concrete pouring into structures. Can be used as a permanent anchor during construction or as a temporary anchor in applications such as wood framework, rebar work, pipe racking, etc. Once connected to a secure anchor point, it forms a secure attachment point for connecting devices such as harnesses, lanyards, SRLs, or lifelines. Provides for convenient tie-off points throughout the perimeter of structures during construction.
✅ 🛠 CONVENIENT – Webbing is made from dependable material that ensures its suitable for the most severe environments. Convenient loop ends minimize noise from D-rings hitting concrete. Lightweight, easy storage, no noise, and high-visibility. Rugged construction endures rough use, standing up to long periods of outdoor elements including sun exposure. High sun rating minimizes damage for longevity. Protective high-viz yellow finish on webbing repels water, grease, and dirt, extending service life.
✅ 🛠 COMPLIANT – Concrete anchor straps are a quick, cost effective anchoring solution and they’re ideal for building applications. This compliant strap is designed and intended to be used with other components of a Personal Fall Arrest System. Meets all applicable ANSI, OSHA and CSA requirements. Works with your fall protection items. Used for various applications such as construction, climbing, roofing, surveying, window cleaning, etc.
✅ 🛠 SERVICE – AFP products are proudly designed, tested, and shipped from FL, USA. Our team will quickly answer all your questions and concerns about your order in English or Spanish, “Se Habla Español.” WOLF products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution.
SPECIFICATIONS
Item: Concrete Anchor Strap
Series Model: AFAS1104 / AFAS1106
Color: Black / Hi-Viz Yellow
Length: 4/6 Feet
Material: Heavy-Duty High-Strength Polyester Webbing
Performance: 5,000 lbs (22.2 KN) Tensile Strength
DESCRIPTION
The AFP 4/6-foot concrete anchor strap is comprised of heavy-duty webbing, designed to diminish the risks of fall. The tough webbing is highly resistant to abrasion, aging, and won’t soften from frequent use. This webbing has low shrink properties and a high-temperature threshold. Our Concrete Anchor Strap is made of a strong polyester web inner core which is further protected by a heavy-duty polyester web sheath. The premium sheath protects the inner core from abrasion and wear and extends its overall life.
Our straps have a build quality that is second-to-none, backed by decades of design, research, manufacturing know-how, and on-the-job performance. Ideal for uses in residential, commercial, or industrial markets such as construction, roofing/roofer, lifts, scaffolding platforms, fall protection kits, guardrails, lanyard extension, and many more! Meets or exceeds all applicable OSHA, ANSI, and CSA requirements, and works with your ANSI OSHA fall protection items., including the stringent ANSI Z359.12, Z359.1-2007.
FROM THE MANUFACTURER
This equipment must be used by a Competent Person, or the single user must read and fully understand the limitations and proper use of the Fall protection equipment and be professionally trained by the Competent Person prior to use. For use by one person only, with a maximum weight of 310 lbs. Combined user weight, including clothing and tools, must not exceed the weight capacity of 420 lbs, 5,000 lbs (22.2 KN) tensile strength. Straps should be removed from any surface that may damage the material such as concrete, stucco roofing material, etc., that could accelerate cutting or abrading of attached components. |  
AFP Heavy-Duty Tongue Buckle Body Belt, PPE for Safety Harness, Work Positioning Restraint (OSHA/ANSI Compliant), 1.75'' Wide
Features
✅COMFORT – Reinforced edges prevent skin irritation for added comfort and relief. Water-wicking material averts the belt from sweat and water breakage. Designed to allow for better lateral movements and to be used with a full body harness with a shock absorbing lanyard, or a self-retracting device. Compact and lightweight design.
✅SAFE – Alloy steel grommets ensures all weather performance preventing corrosion against all weather conditions. Rugged construction endures rough use, standing up to long periods of outdoor elements including sun exposure without tearing or fraying for added longevity.
✅RELIABLE – Body Belt Upgraded braided webbing designed with a high-tension stitching pattern for maximum security and a tensile strength of over 5,000 lbs.! The tough webbing is highly resistant to abrasion, aging, and won’t soften from frequent use. This webbing has low shrink properties and a high-temperature threshold. Our belts have a build quality that is second-to-none, backed by decades of design, research, manufacturing know-how and on-the-job performance.
✅CONVENIENT – This compliant belt is designed and intended to be used with other component of a Personal Fall Arrest systems or Personal restraint systems. The harness is made from a dependable webbing that ensures that it is suitable for the most severe environments all while maintaining maximum comfort.
✅PERFORMANCE – Meets OSHA 1926 Subpart M, OSHA 1910 and ANSI Z359.3‐2007 when integrated into a full body harness. This equipment must be used by a Competent Person, or the single user must read and fully understand the limitations and proper use of the Fall protection equipment and be professionally trained by the Competent Person prior to use. Can also be used as a belt to hold tool pouches.
✅SERVICE – AFP products are proudly designed, tested, and shipped from FL, USA. Our team will quickly answer all your questions and concerns about your order in English or Spanish, “Se Habla Español.” WOLF products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution.
SIZE CHART
Small: From 27 inches - 42 inches
Medium: From 31 inches - 46 inches
Large: From 35 inches - 50 inches |  
FEATURES & DESCRIPTION:
• Lightweight design for all day comfort
Extremely durable, heat-treated, zinc plated snap hooks and twist link chain construction
• Lightweight and reliable design makes this assembly ideal for hands-free work positioning
• 100% proof loaded to 3600 lbs. for added tensile strength
• Must be accompanied by a harness with side positioning rings
• Free fall must be limited to less than 2 feet
• Weight: 4.5 lb.
Length: 26 inches
• Worker Capacity Range 130-310 lbs.
• Adjustable quick links
✅STRENGTH – 100% proof loaded to 3600 lbs. This chain assembly features 3,600 lb. gate-rated double-locking aluminum rebar hook and dual snap hooks.
✅ENGINEERED – This heavy-duty 19-link steel chain features a single 360° steel rotating rebar hook for easier lateral movements while on the job.
✅DURABLE – Extremely reliable design, heat-treated, forged steel hooks and twist link chain construction.
✅LIGHTWEIGHT – Lightweight aluminum and reliable design makes this assembly ideal for hands-free work positioning.
✅ LIGHTWEIGHT – Lightweight aluminum and reliable design makes this assembly ideal for hands-free work positioning.
The AFP’s Gold Zinc Rebar Positioning Chain Assembly with Swivel Hook is perfect for work positioning applications and tie-off on rebar assemblies. Workers can work hands-free to perform their work while simultaneously leaning away from work assemblies, with the chain's double-legged and swivel design. This heavy-duty 19-link steel chain features a single 360° steel rotating rebar hook. The chain features 3,600 lb. gate-rated double-locking aluminum rebar hook and dual steel snap hooks. The Rebar Positioning Chain Assembly must be used with a full-body harness that includes side D-rings. The chain must not be used for fall arrest free falls over 2 feet.
SPECIFICATIONS
Item: Rebar Chain Assembly
Hardware Material: Lightweight Forged Heat Treated Zinc
Anchorage Rebar Hook Gate Opening: 2-1/2"
Snap Hook Gate Opening: 1’’
Body Connection: 1 Rebar Hook
Base Connection: 2 Snap Hooks
Chain Length: 26 inches
Worker Capacity Weight 130 – 310 Lbs.
FEATURES
The AFP 26’' Rebar Positioning Chain Assembly with Swivel Hook is perfect for work positioning applications and tie-off on rebar assemblies. Workers can work hands-free to perform their work while simultaneously leaning away from work assemblies, with the chain's double-legged and swivel design. This heavy-duty 19-link steel chain features a single 360° steel rotating rebar hook. The chain features 3,600 lb. gate-rated double-locking rebar hook and dual snap hooks. The Rebar Positioning Chain Assembly must be used with a full-body harness that includes side D-rings. The chain must not be used for fall arrest free falls over 2 feet. |
6 FT Single Leg Internal Shock Absorbing Lanyard with Dual Snap Hooks
Features & Description
✅SAFE – The AFP 6 FT Single Leg Internal Shock Absorbing Lanyard is made with a lightweight, heavy-duty, high-strength outer polyester webbing and a polyester core specially sewn in to reduce impact forces, with two substantially secure heavy-duty double-locking gates.
✅DURABLE – The tough webbing is highly resistant to abrasion, aging, and won’t soften from frequent use. This webbing has low shrink properties and a high temperature threshold.
✅CONVENIENT – Our most popular 2-in-1 fall arrest single lanyard that minimizes trip hazards or fall with a shock absorber built into the lanyard, eliminating the need for an additional bulky shock pack. Elasticated leg expands from 4-1/2 to 6 feet and can resist 8,500 lbs. of tensile strength!
✅COMPLIANT – Meets all applicable strict requirements of the American National Standards Institute and in compliance with the Occupational Safety and Health Administration ANZSI Z359.13-13, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910, including the stringent ANSI Z359.1.
✅ SERVICE – AFP products are proudly designed, tested, and shipped from FL, USA. Our team will quickly answer all your questions and concerns about your order in English or Spanish, “Se Habla Español.” WOLF products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution.
The AFP Single-Leg Internal Shock Absorbing Lanyard is comprised of heavy-duty webbing, designed to diminish the risks of falling or slipping. The tough webbing is highly resistant to abrasion, aging, and won’t soften from frequent use. This webbing has low shrink properties and a high-temperature threshold. Constructed to scale down the impact forces resulting from fall, this Shock Absorbing Lanyard assists workers in effectively moving and position themselves on the job site.
The shock absorber is built within the lanyard, making this a lightweight 2-in-1 feature that eliminates the need for a bulky shock pack. This shock-absorbing lanyard does not extend pass 6 FT unless impacted by the force of fall and must be used in conjunction with a full-body harness. Built tough, to limit fall forces up to 900 lbs. or less. Forged steel connectors are corrosion resistant and have a 3,600 lb. gate strength. The lanyard and its double-locking connectors are all ANZI compliant and are easy-to-use. Meets OSHA and ANSI standards, including the stringent ANSI Z359.1.
SPECIFICATIONS:
🛠️Weight: 2.5 lbs.
🛠️Standard Length: 4-1/2 ft.
🛠️Extended Length: 6 ft.
🛠️Max Freefall: 6 ft.
🛠️Connectors: (2) Snap Hooks
🛠️Worker Capacity Range: 130-310 lbs.
🛠️Strength: Min. 8,500 lbs. tensile strength
🛠️Average Arrest Force: Less than 900 lbs.
🛠️Connectors Material: Forged Heat-Treated Alloy Steel; Min. 5,000 lbs. tensile strength
🛠️Connector Gates: Alloy Steel; Min. 3,600 lbs. front load and sideload
🛠️Applicable Standards: ANSI Z359.13-13, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910.
The AFP Single-Leg Internal Shock Absorbing Lanyard is comprised of heavy-duty webbing, designed to diminish the risks of falling or slipping. The tough webbing is highly resistant to abrasion, aging, and will not soften from frequent use. This webbing has low shrink properties and a high-temperature threshold. Constructed to scale down the impact forces resulting from fall, this Shock Absorbing Lanyard assists workers in effectively moving and position themselves on the job site. The shock absorber is built within the lanyard, making this a lightweight 2-in-1 feature that eliminates the need for a bulky shock pack.
This shock-absorbing lanyard does not extend pass 6 FT unless impacted by the force of fall and must be used in conjunction with a full-body harness. Built tough, to limit fall forces up to 900 lbs. or less. Forged steel connectors are corrosion resistant and have a 3,600 lb. gate strength. The lanyard and its double-locking connectors are all ANZI compliant and are easy-to-use. Meets OSHA and ANSI standards, including the stringent ANSI Z359.1. |
6 FT Single Leg Internal Shock Absorbing Lanyard with Snap & Rebar Hook
Features & Description
✅SAFE – The AFP 6 FT Single Leg Internal Shock Absorbing Lanyard is made with a lightweight, heavy-duty, high-strength outer polyester webbing and a polyester core specially sewn in to reduce impact forces, with two substantially secure heavy-duty double-locking gates.
✅DURABLE – The tough webbing is highly resistant to abrasion, aging, and won’t soften from frequent use. This webbing has low shrink properties and a high temperature threshold.
✅CONVENIENT – Our most popular 2-in-1 fall arrest single lanyard that minimizes trip hazards or fall with a shock absorber built into the lanyard, eliminating the need for an additional bulky shock pack. Elasticated leg expands from 4-1/2 to 6 feet and can resist 8,500 lbs. of tensile strength!
✅COMPLIANT – Meets all applicable strict requirements of the American National Standards Institute and in compliance with the Occupational Safety and Health Administration ANZSI Z359.13-13, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910, including the stringent ANSI Z359.1.
✅ SERVICE – AFP products are proudly designed, tested, and shipped from FL, USA. Our team will quickly answer all your questions and concerns about your order in English or Spanish, “Se Habla Español.” WOLF products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution.
The AFP Single-Leg Internal Shock Absorbing Lanyard is comprised of heavy-duty webbing, designed to diminish the risks of falling or slipping. The tough webbing is highly resistant to abrasion, aging, and will not soften from frequent use. This webbing has low shrink properties and a high-temperature threshold. Constructed to scale down the impact forces resulting from fall, this Shock Absorbing Lanyard assists workers in effectively moving and position themselves on the job site.
The shock absorber is built within the lanyard, making this a lightweight 2-in-1 feature that eliminates the need for a bulky shock pack. This shock-absorbing lanyard does not extend pass 6 FT unless impacted by the force of fall and must be used in conjunction with a full-body harness. Built tough, to limit fall forces up to 900 lbs. or less. Forged steel connectors are corrosion resistant and have a 3,600 lb. gate strength. The lanyard and its double-locking connectors are all ANZI compliant and are easy-to-use. Meets OSHA and ANSI standards, including the stringent ANSI Z359.1.
SPECIFICATIONS:
🛠️Weight: 3.4 lbs.
🛠️Standard Length: 4-1/2 ft.
🛠️Extended Length: 6 ft.
🛠️Max Freefall: 6 ft.
🛠️Connectors: (1) Rebar and (1) Snap Hook
🛠️Worker Capacity Range: 130-310 lbs.
🛠️Strength: Min. 8,500 lbs. tensile strength
🛠️Average Arrest Force: Less than 900 lbs.
🛠️Connectors Material: Forged Heat-Treated Alloy Steel; Min. 5,000 lbs. tensile strength
🛠️Connector Gates: Alloy Steel; Min. 3,600 lbs. front load and sideload
🛠️Applicable Standards: ANSI Z359.13-13, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910.
The AFP Single-Leg Internal Shock Absorbing Lanyard is comprised of heavy-duty webbing, designed to diminish the risks of falling or slipping. The tough webbing is highly resistant to abrasion, aging, and will not soften from frequent use. This webbing has low shrink properties and a high-temperature threshold. Constructed to scale down the impact forces resulting from fall, this Shock Absorbing Lanyard assists workers in effectively moving and position themselves on the job site.
The shock absorber is built within the lanyard, making this a lightweight 2-in-1 feature that eliminates the need for a bulky shock pack. This shock-absorbing lanyard does not extend pass 6 FT unless impacted by the force of fall and must be used in conjunction with a full-body harness. Built tough, to limit fall forces up to 900 lbs. or less. Forged steel connectors are corrosion resistant and have a 3,600 lb. gate strength. The lanyard and its double-locking connectors are all ANZI compliant and are easy-to-use. Meets OSHA and ANSI standards, including the stringent ANSI Z359.1. |
Reviews
There are no reviews yet.